Dupont IntegraTec XP 55 UXA 매뉴얼 - 페이지 8
{카테고리_이름} Dupont IntegraTec XP 55 UXA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dupont IntegraTec XP 55 UXA 13 페이지.
페이지 인쇄Cautions:
Do not mistaken the
filtrate end and ensure X-ring installed in position.
Request the latest exploded drawing from your DuPont contact:
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type I Technical Drawing
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type II Technical Drawing
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type III Technical Drawing
4.6
Install Feed End Cap
Install X-ring (7) to the feed end, then assemble the bottom end cap A or B(whichever appropriate) to it, install head clamp
pairs (4) , fasten spacer pairs (5), nuts M10 (2), Double-Threaded Bolts (3) , screw nuts tightly at the torque of 30N
Feed Clamp
Orientation.
Cautions:
Do not mistaken the
filtrate end and ensure X-ring installed in position.
Request the latest exploded drawing from your DuPont contact:
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type I Technical Drawing
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type II Technical Drawing
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type III Technical Drawing
Page 8 of 13
Figure 5. Filtrate Clamp Orientation
Figure 6. Feed Clamp Orientation
End Cap Assembly
(Form No 45-D02586-en)
(Form No 45-D02587-en)
(Form No 45-D02588-en)
•
m, refer to
(Form No 45-D02586-en)
(Form No 45-D02587-en)
(Form No 45-D02588-en)
Form No. 45-D04608-en, Rev 0
September 2023