Freedom Scientific Eye-Pal 사용자 설명서 - 페이지 13

{카테고리_이름} Freedom Scientific Eye-Pal에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Freedom Scientific Eye-Pal 16 페이지. Scanning and reading appliance

Connecting Headphones or External Speakers

1. Headphones with a pin audio jack are recommended. Headphones with a

USB connector are not compatible with Eye-Pal Reader.

2. With the device on, plug the headphones or speakers into Eye-Pal Reader.

The headphone jack is located on the right side of the device.

Note: Always stop reading before plugging or unplugging the headphones or

external speakers. If you add or remove the headphones or speakers

while Eye-Pal Reader is reading and a problem occurs, restart the

device and follow the instructions.

To collapse Eye-Pal Reader, locate the button at the joint of the camera head

and long vertical arm. Press this button and swivel the camera head down and

away from you.

Then locate the button on the joint that is towards the back on the right side of

the platform. While holding the arm of the camera press the button and slowly

lower the arm it until it lays flat on the platform.