AUDIOFOCUS EVOSub15 사용자 설명서 - 페이지 9

{카테고리_이름} AUDIOFOCUS EVOSub15에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AUDIOFOCUS EVOSub15 16 페이지.

3. Active Sub with auxiliary power outputs (EVOSub15a-Flex, EVOSub18a-Flex)

The best way to have a compact ''plug and play'' system is EVOSubXXa -Flex. It has exactly the same features than

the EVOSubXXa, except that the amplifier module is a double one. So, EVOSubXXa -Flex includes auxiliary power

outputs for Top units.

To ensure a good Top/Subwoofer ratio, SLSubXXa-Flex has 4 presets. That permits coupling EVOSubXXa -Flex with

high, middle and low sensitivity Top units.

Rear connection description

1. Left input.

2. Right input.

3. Left output.

(190Wrms/8ohms; 350Wrms/4ohms)

4. Right output.

(190Wrms/8ohms; 350Wrms/4ohms)

5. Bridge output (600Wrms/8ohms).

1. The main voltage must be ALWAYS earthed to protect

user in case of current losses or bad insulation.

2. ALWAYS replace the fuse with the same type and value

(T3.15A/240V).

3. Make sure that the power switch is set to "OFF" before

you connect the devices

4. A good cable improves the sound quality. Input cables

should be as short as possible.

5. If long signal cables are necessary, you should use

balanced cables.