Danguard HS-400 사용자 설명서 - 페이지 10

{카테고리_이름} Danguard HS-400에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Danguard HS-400 17 페이지.

페이지 인쇄

5. Main Menu

5.4 Camera

Press in the real-time monitoring the MENU but-

ton to enter the main menu.

Press the t or u button to select the menu

item CAMERA. Confirm with OK.

Pairing

Press the p or q button to select the menu

item „Pairing". Now use the p or q button to

select a camera from which you want to pair

and confirm with OK. Then a message box

appears that prompts you to press the pairing

button on a camera.

Press within 35 seconds on the back of the ca-

mera the pairing button for about 2 seconds.

Now the camera is connected to the monitor

and there are no other wireless frequencies

disturbed.

If pairing fails, the system prompts "Pairing fai-

led". Please perform pairing again.

Note:

The cameras have already been factory

paired with the monitor. You must per-

form this step only if interference to other

wireless frequencies or if you buy more

individual cameras.

ENGLISH

5. Main Menu

Activation

Press the p or q button to select the menu

item „Activation". Now use the p or q button

to select a camera which you want to activate.

Press the t or u button to enable or disable a

camera. When a camera is disabled, it has no

function and will not record video or activate

an alarm.

PIP Setting

Press the p or q button to select „PIP Setting"

and confirm with OK. Now use the p or q button

to select a camera and confirm again with OK.

Resolution Size:

Press the p or q button to select a video re-

solution. You can choose between „high" and

„low". Confirm your selection with OK.

Quality:

Press the p or q button so set the quality of

the videos. You can choose between „Low",

„Medium", „High" or „Top". Confirm your selec-

tion with OK.

To exit the menu and save the settings, press

the MENU button.

Note:

Higher the resolution and the quality is

set, more memory is required for each

video on the SD card or USB device.

ENGLISH