Daniamant Dan WL3 설치 및 유지 관리 지침 - 페이지 2

{카테고리_이름} Daniamant Dan WL3에 대한 설치 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Daniamant Dan WL3 4 페이지. Lifejacket light

Installation

The WL3 is a Leisure and Inflatable Lifejacket version of the W3 Light. It is the

responsibility of the lifejacket owner to ensure that the light is attached securely

and is in the correct position on the lifejacket to provide maximum visibility when

the wearer is in the water. Place the unit on a strap and insert the clip from below

until it locks in place.

Clip part no.1960. "

must be ordered separately".

The complete unit may be changed by the lifejacket owner, no specialised tools

are required.

Operation

The DAN WL3 is switched on automatically when the sensor is immersed in water

and can be switched off and back on by pressing the on/off button. The light can

also be activated and deactivated manually under dry conditions by pressing the

on/off button.