Casio QT-2100 설치 및 다운 복구 매뉴얼 - 페이지 9

{카테고리_이름} Casio QT-2100에 대한 설치 및 다운 복구 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio QT-2100 18 페이지. Versatile intelligent terminal
Casio QT-2100에 대해서도 마찬가지입니다: 서비스 매뉴얼 (3 페이지), 사용자 설명서 (12 페이지), 참조 매뉴얼 (6 페이지)

페이지 인쇄

1-2-3.

QT-2100 master/satellite system (with remote printer)

QT2000

R/J

PRN (1)...PRN (3)

QT-2100 Installation & Down Recovery Manual

3. Initialize QT-2100 terminals one by one.

Note:

When you want to copy master program to satellites,

complete the master program, and then initialize the satel-

lite and receive the master program during initialization

procedure of satellites.

1. Set up the system (refer to the figure below).

In-line

QT2000

Slip

2. Initialize the master QT-2100 (refer to the Initialization chap-

ter of QT-2100 Programming manual page 8.)

Note 1:

1. Do not turn on other QT-2100.

2. If the QT-2100 cannot recognize the local printer(s) cor-

rectly, check the dip switches on the printer or printer

cable and try initialization operation again. Casio printer

cable (PRT-CB-8A/-8B) is required for proper recognition

of the local printer.

Note 2:

If the Slip printer is connected to COM 4, 5, or 6 port,

automatic printer detection during initialization is not

made. In this case, program the I/O parameter file manu-

ally and flag clear the machine.

3. Initialize QT-2100 terminals one by one.

Note:

When you want to copy master program to satellites,

complete the master program first, and then initialize the

satellites and receive the master program at the end of

initialization procedure of satellites.

4. Declare remote printer by programming the printer connection

table to all terminals in the system (refer to the Programming

printer connection section in the Program 3 chapter of the

Programming manual page 70.)

QT2000

Slip

PRN (1)...PRN (3)

I-9