ADDON EDFAMUX 10G 사용자 및 설치 매뉴얼 - 페이지 7
{카테고리_이름} ADDON EDFAMUX 10G에 대한 사용자 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADDON EDFAMUX 10G 20 페이지.
페이지 인쇄Regarding Fiber-Optic Cables
The AddOn Networks EDFAMUX is designed to include fiber-optic components/products,
including optical connectors to connect optical cables. Unlike electrical wires, the insides of
optical cables contain a fiber made of glass. Due to the different properties of optical fiber
when compared to the copper used in electrical wires, some additional precautions must be
taken as detailed below:
• Avoid bending fiber-optic cables beyond their minimum bend radius. An arc smaller
than a few inches in diameter can damage the cable and cause problems which are
difficult to diagnose.
• Do not let fiber-optic cables hang free from the connector.
• Do not allow fastened loops of cable to dangle. If the loops dangle, the cables can
become stressed at the fastened point.
• Secure cables in the cable management system so that they are not supporting their
own weight.
• Place excess cable out of the way in a neatly coiled loop, using the cable management
system. Placing fasteners on a loop helps to maintain its shape.
Regarding the Laser
The AddOn Networks EDFAMUX includes a Class 1 Laser which is generally harmless; however,
extra precaution is still advised. These precautions are noted below:
• Take care when connecting or disconnecting optical fiber cabling or optical transceivers.
• Follow the instructions provided in the manuals of those products.
• Do not open the casing of the EDFAMUX, especially when in operation.
• Never look directly into the end of the fiber or in any opening of the EDFAMUX.
• Never use a microscope, magnifying glass, or any kind of eye loop to observe a fiber end
or in any opening of the EDFAMUX.
• Always wear appropriate safety eyewear when working with the EDFAMUX.
End-of-Life Disposal
Please follow all local and national laws and regulations when disposing of the AddOn Networks
EDFAMUX after deinstallation.
Page | 7