AEV ACUO 908 Serie 빠른 매뉴얼 - 페이지 8

{카테고리_이름} AEV ACUO 908 Serie에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEV ACUO 908 Serie 17 페이지. On air broadcast console

페이지 인쇄
AEV ACUO 908 Serie 빠른 매뉴얼
Dig - Line Module ( channels 5 – 6 )
All controls on the Dig-Line input channel are described below.
1
2
3
4
5
6
7
8
9
AEV Broadcast Srl, via della Tecnica 33 – 40050 Argelato (BO) Italy
ACUO 908 Serie - AEV ON AIR CONSOLE
Web site www.aev.eu
1 – START lamp, it
lights when the channel fader is
active
2 – knob jog ; directly it select the Gain input level
the range is -12 ÷ +12 dB;
in sequence, the following commands:
1th push-buttom Balance adjust (-12 ÷ +12 dB)
2th push-buttom Treble band adjust (-14 ÷ +14 dB)
3th push-buttom Middle band adjust (-14 ÷ +14 dB)
4th push-buttom Bass band adjust (-14 ÷ +14 dB)
5th push-buttom Private Tel active (OFF/ON)
6th push-buttom TB Studio to C.Room active
(OFF/ON)
7th push-buttom PGM bus selection ( Speech/ Music)
8th push-buttom Control Room Mute active
(OFF/ON)
9th push-buttom Mute C.Studio active (OFF/ON)
10th push-buttom Tally active (OFF/ON)
11th push-buttom TB Regia to C. Studio active
(OFF/ON)
3 – DIG to activate the digital AES/EBU source (only
with the channel in STOP)
4 – LINE to activate the line source (only with the
channel in STOP)
5 – PGM Button for routing the channel to the PGM
bus.
6 – UTL Button for routing the channel to the UTL
bus.
7 – AUX Button for routing the channel to the AUX
bus.
8 - Button enabling the preview CUE.
9 - Fader.
8