Audiolab EDGE 12 sub 사용자 설명서 - 페이지 5

{카테고리_이름} Audiolab EDGE 12 sub에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiolab EDGE 12 sub 19 페이지. Self-powered 12 "subwoofer with a 3.5" voice coil

3. SUBWOOFER BACK PANEL DESCRIPTION

1. AC power socket with main fuse.

2. ON-OFF main power switch.

3. IP control.

4. Preset Selector: Not in this version.

5. Switch for front led on or off.

6. THRU OUTPUT ON XLR CONNECTOR. This is

a male XLR-type connector that produces ex-

actly the same signal that is connected to the

main input jack or a mix of input 1 and input 2.

7. POWER. Green led, indicate on status.

8. Signal / limit, red led, indicate on status.

9. Input 2 Volume Control.

10. Input 1 Volume Control.

11. Line / mic switch (channel input 1 only)

12. XLR and 1/4" combo input 1. Input 1 may

accept a MIC or line-level signal via XLR or

line-level signal via TRS 1/4" cable. Be aware

of the position of the MIC / line switch (11).

13. XLR and 1/4" combo input 2. Input 2 may

accept Hi-Z sources (such as guitars) via the

TRS 1/4" input, or line-level signal via XLR.

Never connect the output of an amplifier

directly to the input of the loudspeaker. This

could damage the input circuitry of the ac-

tive loudspeaker.

14. RCA inputs (input 2 only).

- AUDIOLAB EDGE 12 sub

English version

P. 5