Dura Bike Locker DLMC 조립 지침 매뉴얼 - 페이지 18
{카테고리_이름} Dura Bike Locker DLMC에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dura Bike Locker DLMC 18 페이지.
페이지 인쇄a. Line up a Hammer Drill with a 3/8" bit suitable for concrete and drill a hole through the
leveler plate into the concrete.
b. Next the locker can be anchored to the ground, ensure the redhead is straight not crooked
when inserting it through the hole in the leveler plate and into the hole you drilled. Using a
hammer, pound the redhead into the ground (make sure you already have the nut on your
redhead before you begin hammering as they tend to mushroom where struck). Be careful
not to strike the locker, once the redhead is secure tighten the nut to anchor the locker in
place (do not over tighten).
END