ADDON NWAR3650 빠른 설치 매뉴얼 - 페이지 2

{카테고리_이름} ADDON NWAR3650에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADDON NWAR3650 9 페이지. Wireless adsl2/2+ modem router (4-port)

1. Hardware Connection

Rear panel:

Interface

Line

WLAN

Reset

WPS

LAN1/2/3/4

USB

Power

Physical Connection

Connect the ADSL cable from BT filter to the Line port at the back of the router.

Connect the Ethernet cable from the Ethernet port on the router to the Ethernet port on the PC.

Plug the power cable to the router and turn on the power for the router.

PC Configuration

Windows XP

Click "start" -> "Control Panel" ->"Network Connections" .

Right click on "Local Area Connection" under "LAN or High Speed Internet" and choose "Properties"

Select " Internet Protocol (TCP/IP)", and click "Properties", as shown in g.1

Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", click "OK" to save

the settings.

For any further information on ADDON product, please visit our website: www.addon-tech.com

RJ-11 port: Connect the Modem to ADSL connector or splitter by telephone line.

Enable or disable the WLAN. Press the button to enable WLAN.

To restore the factory default, keep the device powered on and push a long needle into the hole. Press down the

button and then release.

Enable or disable the WPS. Press the button to enable WPS.

RJ-45 port: Connect the Modem to a PC or other network device by network cable.

USB host port, connect to another USB device to supply some value-added application.

Power supplied port, plug in for power adapter that the power input is 12V DC, 1.25 A.

Power switch.

Description