Casio CT-S500 사용자 설명서 - 페이지 3

{카테고리_이름} Casio CT-S500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio CT-S500 7 페이지.

페이지 인쇄

New features in firmware version 1.06 (CT-S500)/

1.02 (CT-S1000V)

This section outlines the functions added in this version.

■Added the ability to change the routing of MIDI IN channels 1-5 from Port C

to Port A (the parts used for keyboard operation)

By changing the routing of MIDI messages received on channels 1-5, it is possible to change keyboard

sounds based on MIDI messages, or use MIDI note messages instead of the keyboard to play notes.

The available destinations are Port C, which is assigned to parts 33 to 37 of the sound source, and Port

A, which is assigned to parts 1 to 5 of the sound source used for keyboard sounds.

MIDI messages on channels 1 to 5 correspond to parts 33 to 37 of the sound source or parts 1 to 5 of

the sound source, respectively.

For detailed information about parts and ports, refer to the "MIDI Implementation" pages below:

CT-S500

https://support.casio.com/global/en/emi/manual/CT-S500/

CT-S1000V

https://support.casio.com/global/en/emi/manual/CT-S1000V/

The following have been added to the Settings section.

Setting Item

Name

MIDI IN Ch.

Allows you to use MIDI

1-5 Port

IN for the keyboard part

by changing the

destination of MIDI

channel messages for

channels 1-5.

• The settings for keyboard sounds and MIDI IN may differ in some minor details, such as the settings

made by the device and MIDI IN.

• The effect of some MIDI system messages will vary depending on the MIDI IN Ch. 1-5 Port setting.

For detailed information, refer to the "MIDI Implementation" pages below:

CT-S500

https://support.casio.com/global/en/emi/manual/CT-S500/

CT-S1000V

https://support.casio.com/global/en/emi/manual/CT-S1000V/

Description

MIDI In

1-5Ch Port

Display

C, A (Default: C)

C: Sends MIDI messages received on

channels 1-5 to Port C parts 33-37 of the

sound source.

A: Sends MIDI messages received on

channels 1-5 to Port A parts 1-5 of the

sound source. These parts are used for

keyboard control.

Setting Values