AUDIOLINE 1892 사용 설명서 - 페이지 8

{카테고리_이름} AUDIOLINE 1892에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AUDIOLINE 1892 12 페이지. Classic telephone

Setting Up

2.1

The following items are supplied:

one telephone base

one telephone connecting cable

2.2

After unpacking your telephone, you must first connect the telephone receiver to the telephone

base. Take the end of the spiral cable and plug it into the socket HANDSET of the telephone

base HANDSET.

2.3

Connect the telephone cable supplied to the telephone socket and the telephone jack TEL

LINE of the telephone base. The telephone works using the MF system (Tone Dialling).

Important note!

Before using the telephone for the first time, please observe the following instructions:

Connect the telephone as described in the operating instructions.

Before the first call can be received, you must first lift the receiver and wait for the dialling tone.

Replace the receiver and your telephone is ready for use.

This procedure should also be repeated if the telephone has not been used for some time.

3.1

Your telephone can be used like any conventional telephone.

Please follow the instructions:

Lift the receiver and wait until you hear the dialling tone.

Now dial the required telephone number.

To end the call, replace the receiver on the rest.

3.2

When a call comes through, you will hear the ringing tone. The call can now be accepted using the

receiver.

3.3

If a connection that you have dialled is engaged or you were unable to get through to anybody, simply

replace the receiver. The last number dialled remains stored in the telephone automatically. The redial key

is in the center of the dial area. To use the redial facility, lift the receiver and press the redial button. The

stored redial number will now be dialled.

- Operating Instructions -

one telephone receiver with cable

one instruction manual