AUDIOLINE Baby Care 18 사용 설명서 - 페이지 12
{카테고리_이름} AUDIOLINE Baby Care 18에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AUDIOLINE Baby Care 18 17 페이지. Baby monitor with digital, noiseless radio communication
페이지 인쇄
Appendix
5 Appendix
Troubleshooting
Should problems arise with the telephone, please refer to the following information first.
In the case of technical problems, contact our Hotline. Please refer to our website
www.audioline.de for the telephone number.
In the case of claims under the terms of guarantee, contact your sales outlet.
There is a 2 year period of guarantee from the date of purchase.
•
The power LED does not light up when connecting the unit to the mains.
- Check whether there is a power failure. Check whether all connections are ok and both units
are switched on (on/off key).
- Switch the parent unit on and press the keys ▲ and ▼ simultaneously. The display shows ID.
Power on the baby unit. Within approx. 5 seconds the connection will be established.
•
If the reception is superimposed by noise or the link is bad (caused, for example, by an active
Wi-Fi nearby), you can switch the transmitter channel by pressing the On/Off button on the baby
unit. 12 channels are available.
•
Your baby monitor is emitting an high pitched ear-piercing noise.
- This may happen if your parent and baby units are too close together. Move them further
apart.
Cleaning and upkeep
Clean the equipment with a dry, soft, lint-free cloth. Never use cleaning agents or solvents.
Declaration of Conformity
This device fulfils the requirements stipulated in the EU directives:
- 1999/5/EU directive on radio equipment and telecommunications
terminal equipment and the mutual recognition of their conformity.
- 2005/32/EU directive "Energy-using products".
Conformity with the above mentioned directive is confirmed by the CE symbol on the device.
Please refer to the free download in our Website www.audioline.de for complete declaration of con-
formity.
Technical data
Operating frequency
Range
Power supplies
Permissible ambient temperature
10
2.4 GHz
12 channels (2.413 - 2.468 MHz in 5 MHz steps)
Up to 250 m under optimum conditions. It is possible to
reach up to 50 m in buildings (as a result of walls,
doors etc.)
Input: 100~240 V AC, 50/60 Hz
Output: 5 V DC, 550 mA
10 °C to 40 °C