AudioLink JM-STU01 빠른 시작 사용 설명서 - 페이지 6
{카테고리_이름} AudioLink JM-STU01에 대한 빠른 시작 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioLink JM-STU01 10 페이지. Wi usb audiolink stereo digital wireless audio transmitter
페이지 인쇄Pairing
Before using the Wi USB AudioLink, you will
need to pair the Wi USB AudioLink transmitter
with the Wi AudioLink or Wi AudioStream
receivers (Rx). Pairing will allow a connection
between the transmitter and the receiver.
1.
First turn ON the receiver (Rx) by pressing
and holding the POWER button on the
receiver
2.
Press and hold the LINK button
Wi USB AudioLink transmitter for 3 seconds.
The Power/Status green LED
Wi USB AudioLink will start fl ashing fast.
The Wi USB AudioLink is now in a Pairing
mode and ready to search for receivers.
3.
Press and hold the LINK button
receiver (Rx) for 3 seconds. The green
Power/Status LED
start fl ashing fast. The receiver is now in a
Pairing mode and ready to be found by the
transmitter.
4.
Once the Wi USB AudioLink pairs with the
receiver, the Power/Status LED on both
devices will turn to solid Green.
for two seconds.
on the receiver will
on the
on the
on the