Casio MZ-X500 사용자 설명서 - 페이지 7

{카테고리_이름} Casio MZ-X500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio MZ-X500 20 페이지.

페이지 인쇄

■ Enhanced volume adjustment function for Drawber Organ tones

■ Addition of a Percussion Mode for Drawber Organ tones

(Both MZ-X500 and MZ-X300)

The drawbar organ parameters shown below are added by this version.

• The Leakage Noise setting of Version 1.0X has been changed to the Running Noise setting for this version.

Display Name

Volume

Click Level

Percussion Mode

Noise >Enter

Running Noise

Tone Wheel

Leakage

Drawbar Leakage

■ Addition of user samples to the Inst Select (instrument selection) of Drum tones

(Both MZ-X500 and MZ-X300)

This change makes it possible to use the Inst Select item on the drum sound editable tone parameter screen to

specify user samples loaded from a USB flash drive or recorded with the pad sampling function.

• Note that only user samples for which Short is specified as the Length can be specified for a drum sound.

■ Addition of a Group setting for pads

(Both MZ-X500 and MZ-X300)

This update adds a Group function that makes it possible to alternate multiple pads with the pad Setting Item.

Display Name

Group

Controls drawbar organ overall volume.

Sets the click volume.

Specifies how percussion is sounded.

Select "Mono" for monophonic sound, or "Poly" for polyphonic sound.

This is a group of editable noise parameters.

Specifies the volume of the tone wheel signal (Running Noise) that is

always being generated while nothing is being played.

Specifies the volume of signal leakage from other tone wheels (Tone

Wheel Leakage Noise) while something is being played.

Specifies the volume of signal leakage from drawbars (Drawbar Leakage

Noise) that are set to level 0.

Assigns a group number (1 to 8) to a pad.

Performing a pad operation while the operation of another pad with the

same group number is being performed causes the ongoing pad

operation to stop as the new pad operation is started.

Description

Settings

0 to 127

0 to 15

Mono, Poly

0 to 15

Settings

Off, 1 to 8