Danish Interpretation Systems DCS 6000 사용자 설명서 - 페이지 8
{카테고리_이름} Danish Interpretation Systems DCS 6000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Danish Interpretation Systems DCS 6000 14 페이지. Digital conference system
Danish Interpretation Systems DCS 6000에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 사용자 설명서 (10 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (14 페이지)
페이지 인쇄Danish Interpretation Systems
This LED lights if the channel is switched ON by
use of the DIP switch
q
DIP switch
This DIS has 4 individual switches:
1. ON / OFF switch. If set to ON this channels is
transmitting the channel selected by the Rotary
Switch.
2. Not used
3. Not used. Has to be in ON position always
4. Frequency band switch. In ON position; CH O
to CH 13. In OFF position CH 14 to CH29.
When using with IR15-06 and IR15-12 this
switch has always to be in ON position.
q
Rotary Switch
This switch is used for channel setting. This can be
used to set the channels independently of the
frequency band switch.
Front plate layout
Back panel layout
8
Manual 01 18 04452, Printed in Denmark, 02/2003 CHN
Connectors
The IT 6108 contains the following sockets on the
rear side:
q
Power connector
Connection for main power with an integrated ON /
OFF switch.
q
Input (A-H)
Eight XLR sockets feeding the analogue sound to
the transmitter.
q
LINK
A BNC socket for the cascading with other IT 6108
q
HF output 50 ohm
Two BNC sockets for connecting to DIS series
RA15-xx Infrared Radiators. Up to 10 radiators can
be directly connected to these sockets.
Operation manual