Audiomatica CLIO FW-02 설치 매뉴얼 - 페이지 9

{카테고리_이름} Audiomatica CLIO FW-02에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiomatica CLIO FW-02 15 페이지.

3.6.2 THE FIRST RUN

The following steps will guide you through a complete verification of the

system performance and operation.

From the Start Menu choose Programs, then CLIO 12 and click on the CLIO icon.

The program should start smoothly and present the main desktop.

If the system is not calibrated, as the first time you run it, you will receive the

following message.

Should CLIO display an error message take note of it and go to the troubleshooting

section.

3.6.3 INITIAL TEST MEASUREMENT

Let's now execute our first test measurement - play and capture a 1kHz sinusoid.

First of all click on the In-Out Loop

Box connects output A with input A with an internal relay. This connection is very

important as it lets you capture and analyze a signal generated by CLIO without the

need for an external connecting cable.

Then click on the generator icon

exact; more on this later, it's the default signal). Then press the F4 keystroke to

invoke the Multi-Meter as in Figure.

3 CLIO INSTALLATION

button for channel A; in this way the CLIO

to play the 1kHz sinusoid (1031.25Hz to be