Audiomedia AMD 808BT 사용자 설명서 - 페이지 19
{카테고리_이름} Audiomedia AMD 808BT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiomedia AMD 808BT 20 페이지. Bluetooth cd/mp3 player with radio am/fm rds usb-sd/mmc built in
페이지 인쇄
TROUBLE SHOOTING
Before going through the check list, check wiring connection. If any of the problems persist
after check list has been made, consult your nearest service dealer.
Symptom
No power
The car ignition is not on.
The fuse is blown.
Disc cannot be loaded
Presence of CD disc inside
or ejected
the player.
Inserting the disc in reverse
direction.
Compact disc is extremely
dirty or defective disc.
Temperature inside the car is
too high.
Condensation.
Volume is in minimum.
No sound
Wiring is not properly
connected.
The built-in microcomputer is
The operation keys do
not operating properly due to
not work
noise.
The installation angle is not
Sound skips.
more than 30 degrees.
The disc is extremely dirt or
defective disc.
The antenna cable is not
The radio does not
connected.
work.
The radio station
The signals are too weak.
automatic selection
does not work.
Mechanism Error
ERROR 1
ERROR 2
Servo Error
Cause
If the power supply is properly connected
to the car accessory terminal, switch the
ignition key to "ACC"
Replace the fuse.
Remove the disc in the player, then put a
new one.
Insert the compact disc with the label
facing upward.
Clean the disc or try to play a new one.
Cool off or until the ambient temperature
returns to normal.
Leave the player to off for an hour or so,
then try again.
Adjust volume to a desired level.
Check wiring connection.
Press the RESET button.
Front panel is not properly fixed into its
place
Adjust the installation angle to less 30
degrees.
Clean the compact disc. Then try to play a
new one.
Insert the antenna cable firmly.
Select a station manually.
Press the reset button if the error code
does not disappear, consult your nearest
sevice dealer.
Press the reset button if the error code
does not disappear, consult your nearest
sevice dealer.
GB - 18
Solution