Addonics Technologies AEMEDUSIB25F 사용자 설명서 - 페이지 8

{카테고리_이름} Addonics Technologies AEMEDUSIB25F에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies AEMEDUSIB25F 18 페이지. Combo hard drive & mobile rack

Jumper settings inside the Combo Hard Drive25 Case
Internal Hard Drive
Internal Hard Drive
With USIB Interface cable
With IDE cable
Default jumper setting
(Use This setting when the
Jumper setting to enable
USIB drive cradle is
DMA When USIB drive
connected to USB, Firewire
cradle is connected to
or SATA)
the IDE controller
JP4 = Jumper to the Right
JP4 = Jumper to the Left
JP3 = No Jumper
JP3 = Jumper to the Left
JP2 = No Jumper
JP2 = No Jumper
Note:
There may be spare
jumpers in JP2 and JP3.
These spare jumpers
should be sitting on the
outer pin only
Addonics Technologies – Combo Hard Drive USIB25 Users Guide v1.0
External Hard Drive
Default Jumper Setting
(When the enclosure is
used as an External
Hard Drive)
JP4 = Jumper to the Right
JP3 = No Jumper
JP2 = No Jumper
Note:
There may be spare
jumpers in JP2 and JP3.
These spare jumpers
should be sitting on the
outer pin only
7