Dankoff Solar Water Feature 설치 및 서비스 매뉴얼 - 페이지 8
{카테고리_이름} Dankoff Solar Water Feature에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dankoff Solar Water Feature 18 페이지. Solution kit
페이지 인쇄8
The PV Rack comes with two 'ribs' and a 'spine' that will connect to the gimble. Lay one rib across all four holes at
the top of the solar array and use the supplied hardware to attach the rib to the PV's. Note the orientation of the rib
in relation to the top of the array, since the spine will pass through it.
Attach the other rib to the lower holes in the same orientation. Once both ribs have been attached to the PV's,
insert the spine through the lower rib. Center the hole and then tighten the rib bolts. Note the orientation of hole in
the photo below: