DANLERS CEFL PIR 10A 설치 참고 사항 - 페이지 7

{카테고리_이름} DANLERS CEFL PIR 10A에 대한 설치 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. DANLERS CEFL PIR 10A 15 페이지. Ceiling flush pir occupancy switches

페이지 인쇄

1. Troubleshooting

IMPORTANT: yOU MUST ENABLE ThE DEVICE CLOCk BATTERy (SEE PRODUCT

INSTRUCTIONS) FOR ThE ACCURATE SChEDULING OF EVENTS.

Day Types

Defines the Days and Times via a real time clock that a MODE or MODES can be

scheduled. Unless other MODES are added the default MODE will be the only MODE to be

available on a chosen DAY TYPE.

Launch App to display 'ControlZAPP' home page. Press 'Scheduler' button (see

diagram 15).

Press 'Day Types' button. If creating a Day Types for the first time, one 'Day Type' will

be available to edit that can be renamed and duplicated (see diagram 16). New DAY

TYPES can be added by pressing the NEW button on top right of screen.

Press EDIT. New screen appears with a clock button set to 00.00 and MODE option

button (see diagram 17). To assign the timing of your chosen MODE press the clock

button. There are 3 options to choose from: TIME, SUNRISE and SUNSET (see diagram

18). Only one of these three options can be in use with each MODE allocated in the

SCHEDULE.

'TIME' - A real time 24 hour clock automatically starts MODES of switching at specific

times of the day.

To set 'Time' press clock button - Press clock to reveal 24 hour rolling clock, sweep

up or down to allocate correct start time between the blue lines. Press 'Set' when

complete.

'SUNRISE' - ControlZAPP has Sunrise / Sunset prediction that can adjust your timings to

take into account the time at which Sunrise and Sunset occurs from anywhere in the world

providing your mobile or tablet has GPS enabled and that your location is defined in the

settings (see page 9).

MODE switches to occur before or after the predicted SUNRISE time as automatically

identified by the in built GPS. MODES times can be offset before or after the predicted

'SUNRISE' time by altering the timer to the desired setting.

To set 'Offset from Sunrise' press 'Sunrise' button - Press timer '+0' to reveal 24 hour

rolling clock, sweep up or down to allocate correct start time between the blue lines.

Press 'Set' when complete

'SUNSET' - MODE switches to occur before or after the predicted SUNSET time as

automatically identified by the in built GPS. MODES times can be offset before or after the

predicted 'SUNSET' time by altering the timer to the desired setting.

To set 'Offset from Sunset' press 'Sunset' button - Press timer '+0' to reveal 24 hour

rolling clock, sweep up or down to allocate correct start time between the blue lines.

Press 'Set' when complete.

Creating additional Day Types

Launch App to display 'ControlZAPP' home page. Press 'Scheduler' button.

Press 'Day Types' button. New DAY TYPES can be added by pressing the NEW button

on top right of screen.

New screen appears with a prompt to ' Enter name' flashing cursor. Type your preferred

name (Maximum 30 characters with NO spaces) then press 'OK'. The additional Day

Types will appear under any original Day Types.

Scheduling different Modes into your Day Types

Launch App to display 'ControlZAPP' home page. Press 'Scheduler' button.

Press 'Day Types' button. Press 'Edit' button of DAY TYPE you wish to edit.

New screen appears. The clock indicates the Start Time of the chosen Mode. Press

the clock button to select a Start Time for your Mode (see 'Time' 'Sunset' and 'Sunrise'

above).

Choose the Mode you wish to Start at the chosen time. You cannot choose the same

time for multiple modes (see diagram 19).

To select a different MODE press the 'Mode' button a new screen appears prompting '

SELECT MODE' from the list of any MODES you may have saved (see diagram 20).

The settings of the selected MODE are listed in a table in the lower half of the screen

to check that you have the correct MODE. The table may have to be scrolled down to

SCHEDULER

DIAGRAM 15

DIAGRAM 16

DIAGRAM 17

DIAGRAM 18

Diagram 19

PAGE 5