Audion Sterling Stereo Plus Mk 1 사용자 설명서 - 페이지 7

{카테고리_이름} Audion Sterling Stereo Plus Mk 1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audion Sterling Stereo Plus Mk 1 10 페이지. Sterling power amplifiers 12 & 18 watt

페이지 인쇄

outputs marked 2 x black & 2 x red. These are designed for "Bi-

amping".

The ground lift switch is used to effectively reduce a ground

feedback loop and hence noise from some installations.

Finally connect the power cord to a mains electricity supply.

Before proceeding – Are all the connections fitted correctly and

securely tightened?

Finally Check again – make sure everything is correct.

Using your Audion

Congratulations you are now ready to switch your Audion on. But

first we recommend turning the volume control on the front panel

anti-clockwise to zero. On the rear panel locate the on/off button.

Push the button downwards to position 1, this has now turned your

Audion on. You will notice if everything has been installed correctly

that your valves/tubes are starting to glow, your Audion is now

"Warming up". We recommend that an initial few minutes is

allowed for the warm up process to take place. A valve/tube will

change its audio characteristics slightly once it has reached its

nominal operating temperature.

Select your sound source, CD, record, etc. and play. Once your

source has started playing adjust the volume control to your

required level.

On the Integrated model, the five switches correspond to the five

inputs on the rear and can be switched in and out accordingly.

MUTE

Audion Sterling Integrated Amplifier Front Panel

Revision 1.40 Sterling

- 7 -

Audion International