3xLogic VISIX V Series 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} 3xLogic VISIX V Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3xLogic VISIX V Series 12 페이지. All-in-one camera gen ii

PAN ADJUSTMENT

Steps:

Loosen the lock screw-1.

Adjust the panning position of the camera. The adjusting range is from 0 degrees to 360 degrees.

Tighten the lock screw-1.

TILT ADJUSTMENT

Steps:

Loosen the lock screw-2.

Adjust the tilting position of the camera. The adjusting range is from 0 degrees to 90 degrees.

Tighten the lock screw-2.

ROTATION ADJUSTMENT

Steps:

Loosen the lock screw-3.

Rotate the rotation position to adjust the azimuth angle of the image. The adjusting range is from 0

degrees to 360 degrees.

Tighten the lock screw-3.

Panning

ZOOM AND FOCUS ADJUSTMENT

You can use the zoom lever and focus lever to adjust the zoom and focus level. Follow the steps below to adjust

focus and zoom.

Steps:

1. Remove the sun shield and front cover to expose the zoom lever and the focus lever.

2. View the camera image on the monitoring screen.

3. Loosen the zoom lever and move the lever between T (Tele) and W (Wide) to obtain the desired angle

of view.

4. Tighten the zoom lever.

5. Loosen the focus lever and move the lever between F (Far) and N (Near) to obtain the optimum focus.

6. Tighten the focus lever.

Install the sun shield and the front cover back to the camera.

12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

Tilting

Lens Adjustment

Figure 1-4

V-Series Camera Quick Start Guide | VX-4V-B-RI

Rotation