Addonics Technologies AESCHDSASA 사용자 설명서 - 페이지 15

{카테고리_이름} Addonics Technologies AESCHDSASA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies AESCHDSASA 17 페이지. Saturn combo hard drive

PCMCIA Installation for Windows NT

1. Go to Start\Settings\Control Panel

2. Double Click SCSI adapter icon

3. Click on the Driver Tab

4. Click Add to add new driver

5. Follow wizard and point to the location of the driver. (Follow the steps

from the Driver Disc to where you saved the driver files)

6. Select "Addonics PCMCIA..." then click ok.

7. Windows will prompt you for driver location again, to continue

Type in A:\NT then click continue.

8. Click YES to restart your computer.

9. Double Click on the "My Computer" icon. You are now ready to use

the Combo hard drive kit.

Note: You must use the PCMCIA mode for Windows NT.

CardBus/PCMCIA Installation for Windows 2000

1. Make sure your computer is up and running

2. Verify that all cables are connected and there is power to the drive.

3. Insert the PCMCIA cable to the PCMCIA socket.

4. A "New Hardware Found" message shall pops up.

5. Select "Next" to continue installation.

6. Select "Search for a suitable driver...." button and select "Next".

7. In "select a Device Driver page", select "Have Disk" to specify

location. Follow wizard and point to the location of the driver. (Follow

the steps from the Driver Disc to where you saved the driver files)

Select "Addonics CardBus...." click YES for the Windows warning

message and let Win2000 to finish the Installation and that's it.

8. Double Click on the "My Computer" icon. You are now ready to use

the

Combo hard drive kit.

Note:

Brand New Hard drive must be Partitioned and Formatted first.

Addonics Technologies

Saturn Combo Hard Drive User Guide

2/2/05