Danley BC412 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Danley BC412에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danley BC412 8 페이지.

4.2

Operator Responsibility

It is the responsibility of the operator to maintain safe operating levels and to insure that the audience is not harmed by excessive

levels. This is a chart of the recommended exposure limits set by OSHA.

4.3

Aqua Tight Coating

Aqua Tight Coating includes full two layer fiberglass finish for maximum moisture resistance as well as a special polyurea coat

bonded to the fiberglass exterior & two topcoat layers of UV resistant color stabilizer. It also includes all stainless steel exterior

fasteners, an acoustically transparent moisture barrier to the grille, waterproofing the driver cones and sealant for the input plate,

handles or cabinet fixtures. The finish also includes a powder coated stainless steel grille, sealed, waterproof cable leads (12'

length standard), and fully caulked all external joints (except for the "weep" opening at the bottom of the grille).

If a repair is to be made on a loudspeaker with "AT" finish, a few steps must be taken to insure the speaker remains water

resistant in future usage. The caulking must be removed to free the grill and driver access panels. Once the repair is finalized,

the bolts must be coated with silicon and the caulk must be replaced on all panels that have been removed.

Page | 7

DANLEY OWNER'S MANUAL