Audionet Amp I V2 사용자 설명서 - 페이지 8

{카테고리_이름} Audionet Amp I V2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audionet Amp I V2 18 페이지. Stereo audio power amplifier

Installation and power supply

Important

For connecting or removing loudspeakers and/or the pre-

amplifier your AMP1 V2 must be switched off to prevent damage

to the amplifier or the connected units.

Please make sure that all cables are in absolute best conditions!

Broken shields or short-cut loudspeaker cables could damage

speakers and/or amplifiers.

The compact design of the AMP1 V2 requires the unobstructed heat dis-

sipation during operation. Please mind the following security notes:

Important

Please find a place for your Audionet AMP1 V2 that is sufficiently

ventilated to allow the heat to dissipate.

Do not expose the unit to direct sunlight or in close range to heat

sources like radiators or fan heaters.

Do not cover the ventilation slots of the unit.

The mains input 5

the unit to mains use the included cord. If you prefer to use a different

power cord make sure they meet the specifications for your home coun-

try.

Important

The electrical specifications of your home country must meet the

electrical specifications printed onto the back panel.

The AMP1 V2 is a Class I unit and must be earthed. Please ensure a

stable earth connection. The Phase ('hot' pin) is marked 'PHASE' 6

on the back panel for the mains input.

see numbers in section 'Back panel' on page 7

is on the back panel of the AMP1 V2. To connect