3xLogic VISIX VX-VSS-20 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} 3xLogic VISIX VX-VSS-20에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3xLogic VISIX VX-VSS-20 14 페이지. Stereoscopic people counting camera

3. Fill in the remaining connection information (by default, this camera use Port 80).

4. Toggle Collect Counters and Display Counters in VIGIL on.

5. Once you have configured camera connection information, click the Load Device button to detect the

analytics rules currently configured on the camera. Whenever new rules are configured on the camera, the

Detect button must be clicked to refresh the rules in the list. The rule list will populate with available rules.

6. Toggle Enable for all rules you wish to interface with the VIGIL Server.

Note:

Toggling Alarm on will enable alarms in VIGIL Server for the selected rule. If Alarm is not toggled,

only rule data will be inserted to the VIGIL DB. VCM Sync (enabled by default) will enable rule data

syncing with VIGIL Central Management. If no VCM is available, this option is ignored.

7. Click OK after detecting. The Add/Edit Device window will close

8. On the main screen, click Save Changes. Save Changes will only appear when a camera has been added or

edited. All new rule settings will be pushed to VIGIL Server.

Configuration is now complete. The VIGIL Server system will now record video as well as data based on the VX-VSS-

20's detected people counting events.

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

Figure 4-10 VIGIL Analytics Bridge - Add Device Window

Figure 4-11 VIGIL Analytics Bridge - Saving Changes