Audionet PRE I G2 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Audionet PRE I G2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audionet PRE I G2 15 페이지. Stereo – pre - amplifier

Using the remote control

All functions of the PRE 1 G2 can be operated by the Audionet remote

control in the same way as described for the front panel.

For setting the volume level, please push + or - of the remote control vol-

ume button pair. The button mon corresponds to monitor/set button:

push short for selecting the monitor loop; push long for selecting the pro-

gramming functions.

Using the remote control the inputs can be selected directly.

Additionally, the following functions are possible:

Mute

PRE 1 G2 has a soft mute function. If desired to mute PRE 1 G2; please

press the mute button on the remote control. When muting, PRE 1 G2

regulates volume down to -80 dB and then switches off the outputs. If

you press the mute button again, PRE 1 G2 activates the outputs and re-

turns to the volume before

Mains phase recognition

If the mains phase is connected incorrect the PRE1 G2 will tell you while

starting up:

"Attention: Mains phase incorrect!"

Switch off your PRE 1 G2 and change the position of the mains plug at

your wall socket. If the mains phase is connected correctly no warning

will appear in the display while starting up.