Abus PLSG10000 사용자 설명서 - 페이지 12

{카테고리_이름} Abus PLSG10000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus PLSG10000 16 페이지. Z-wave indoor siren
Abus PLSG10000에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지)

페이지 인쇄

English

Load audio files to siren

A PC with Microsoft Windows operating system and a mini USB cable is required. Make sure that the

batteries are inserted in the speech siren as well, otherwise the download will not work.

1. connect the siren to the USB port of the PC using the mini-USB cable

Windows asks you if you want to run the software. Allow and continue. If no pop-up appears, start the

application "Door Bell" on the USB drive.

3. the following screen appears:

The two columns on the left show the PC folders and the audio files in a selected folder.

The column on the right is a temporary memory that displays the list of files that are ready to be

loaded onto the siren. When the device is connected for the first time, this section is filled with files that

are currently in the siren memory.

The siren is supplied with factory preset sounds. These audio files can be used as a reference when

the volume of the audio file is adjusted to the unit's speaker.