audiophony PREZONE642 사용자 설명서 - 페이지 10
{카테고리_이름} audiophony PREZONE642에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiophony PREZONE642 13 페이지. Multi-zone, mount-rackable mixer/preamplifier
페이지 인쇄English
6.3 - Insert
The unbalanced insert point allows you to insert limiters,
compressors, special equalizers or any other processors on the
signal path. The insert (Stereo Jack 6.35 mm) features a closed
contact. When inserting a Jack plug into this connector, the signal
path will be cut. The channel signal is available via the TIP, while
the signal feedback is available via the RING.
The mass is transmitted via the body.
The outgoing signals can be used as direct pre-fade and pre-
equalizer outputs (the tip and the ring will then be short-circuited
to prevent any signal path interruption).
You will be required to use Y-cables (as described below) if using
devices with separated incoming and outgoing signals.
Input
Output
Page 10
PREZONE642 - Multi-zone, mount-rackable mixer/preamplifier
Insert plug on TRS jack
Sleeve
Sleeve
Ring
Ground/Shield
Tip
Return (in)
Sleeve
Sleeve
Ring
Ground/Shield
Tip
Ring
Return (in)
Tip
Send (out)
Ring
Tip
Send (out)