audiophony H11390 사용자 설명서 - 페이지 16

{카테고리_이름} audiophony H11390에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiophony H11390 20 페이지. Active curve array system with mixer

English

Note: If you press and hold the multi-function key (4) for more than 5 seconds, you lock the menu.

The display then shows

To unlock the menu, press and hold the multi-function button again for more than 5 seconds.

4.3 - TWS mode operation :

The Bluetooth TWS mode allows you to connect two MOJOcurveXL together in Bluetooth to broadcast in stereo

from a single Bluetooth source (phone, tablet, ... etc).

Switching on the TWS mode :

1 - If you have already paired one of the two MOJOcurveXL, go to the Bluetooth management of your source and

deactivate Bluetooth.

2 - On both MOJOcurveXL activate the TWS mode. A "Left Channel" or "Right Channel" voice message will be

emitted to confirm that the TWS mode is active.

3 - Reactivate Bluetooth on your source and pair the device named MOJOcurveXL.

4 - You can now play your music in stereo on two MOJOcurveXL.

Note: The TWS mode only works with a Bluetooth source.

Page 16

MOJOcurveXL - Active curve array system with mixer, BT and DSP

OFF : The display never dim

ON : After 8 seconds the display turns off.

Allow to load recorded preset

Allow to record a preset

Erase the recorded preset

Adjust the brightness of the display from 0 to 10

Adjust the contrast of the display from 0 to 10

Reset all the adjustments. Default factory setting is MUSIC mode.

Firmware version information

Exit of the menu