audiophony JOGGER60 사용자 설명서 - 페이지 7
{카테고리_이름} audiophony JOGGER60에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiophony JOGGER60 13 페이지. 60w sound system with usb reader + uhf mic + wired mic
페이지 인쇄JOGGER60 - 60W S
OUND SYSTEM WITH
UHF RECEIVER MODULE
BATTERY CHARGE INDICATOR
MASTER MODULE
2
3
USB
+ UHF
READER
2
3
1
The battery is fully charged when the FULL LED is lit.
The gauge slowly decreases as you are using the JOGGER60.
When reaching LOW, the battery is almost fully discharged and should be charged as
quickly as possible to prevent any damage.
4
1 5 6
+ W
MIC
IRED MIC
1 - Fader allowing you to configure the output volume and
allows you to turn off the module.
2 - Displays the receiving channel information (0 to F): 16
channels
3 - Receiver channel selector
1 - Fader allowing you to configure the output
volume and allows you to turn off the JOGGER60.
2 - Echo level settings. From low to high (clockwise).
3 - Mic input: Plug the supplied handheld mic here.
4 - Auxiliary input (Jack 3.5): Allows you to connect a
line-level auxiliary source such as your mp3 player.
5 - MIX OUT Output (Jack 3.5): Allows you to
retrieve the signal of the MASTER output. This signal
combines all the connected sources (built-in reader,
two mic and AUX IN input).
6 - Power supply input (19V/2,63A): Connect the
power supply here. The battery automatically
charges when the JOGGER is connected to an
electrical outlet. Especially useful when the battery
though you still need to use the JOGGER60.
English
Page 7