Addonics Technologies NAS NAST4SR5HPM-B 사용자 설명서 - 페이지 2
{카테고리_이름} Addonics Technologies NAS NAST4SR5HPM-B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies NAS NAST4SR5HPM-B 4 페이지. Nas storage tower
페이지 인쇄Removing Cover of
Storage Tower
a.
Unscrew the side panel
screws.
b.
Slide the side panel towards
the backside then pull or lift to
open.
c.
To remove the front face
panels, unscrew 2 screws on
opposite sides of the 5 ¼"
drive bay on the tower
Installing drives into the
Storage Tower
a.
Make sure that screws are
placed for both sides of the
mounting bracket to secure
the drives.
b.
After installing the hard drive,
attach the side panels back
to the storage tower.
Setting RAID on the Hardware Port Multiplier (HPM)
-
+
eSATA Status
-
+
USB Status
-
+
PM Power
-
+
PM Health
-
+
HD3 PWR & Access
-
+
HD2 PWR & Access
-
+
HD1 PWR & Access
-
+
HD0 PWR & Access
www.addonics.com
SATA Drive
Front Face Plates
SATA Port 4
SATA Port 1
SATA Port 2
Technical Support (M-F 8:30am - 6:00pm PST)
Side
Panel
Optional Drive Mounting Bracket
SATA Port 3
Phone: 408-453-6212
Side Panel
Screw Locations
Screw Holes
Pin 1
LED Pins
Email: www.addonics.com/support/query/