audiophony MX44 사용자 설명서 - 페이지 5

{카테고리_이름} audiophony MX44에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiophony MX44 8 페이지.

MX44 - 4 inputs / 4 outputs mixer

5 - Presentation

Front panel

Setting the levels of inputs 1 to 4

These inputs can be used to connect either a line level

source or a microphone level source. These inputs are

mono.

Output channel selectors

Each input channel can be assigned to one or the other

of the outputs or both.

1 to 4 outputs level adjustment

Output LED indicators

- SIG : This LED indicates the presence of an output

signal.

- -10dB : This LED indicates the minimum level of the

output signal.

- CLIP : This indicates an output level that is too high

at the output.

We strongly recommend not to exceed brief flashes of

these LEDs in order to prevent sound distortions.

Output equalization

- HIGH (High Frequency control): Allows you to adjust

the output signal trebles from -15 to +15 dB at 12kHz.

- LOW (low frequency control): Allows you to adjust the

output signal basses from -15 to +15 dB at 12kHz.

Power switch

Turns the power on and off. When it is powered on, the

corresponding LED is lit.

English

Page 13