audiophony COMPACT500 사용자 설명서 - 페이지 9
{카테고리_이름} audiophony COMPACT500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiophony COMPACT500 12 페이지. Amplified system with subwoofer and satellites-500w
페이지 인쇄COMPACT500 - Amplified system with subwoofer and satellites -500W
5 - Basical wiring
5.1 - Using the COMPACT500 as 2.1 system:
CH1 input:
Wired MIC
CH2 input:
GUITAR
5.2 - Using the COMPACT500 as a mono 1.1 system:
The COMPACT500 system can be used, for
instance, to give voice to a conference via a
speaker and computer.
To do so, proceed as follows:
- The microphone will be connected to the CH1
combo input via XLR socket, the selector in MIC
position.
- The computer will be connected to the CH3 input
via RCA.
- The satellites are in mono mode, directly set up
onto the subwoofer via the connection slot, which
will transmit the signal between the two satellites.
CH3 input:
MP3 player
Line Out output:
To powered speaker
The COMPACT500 system can be used, for instance, for a
guitar player-singer with soundtrack.
To do so, proceed as follows:
- The microphone will be plugged to the CH1 combo input
via XLR socket, the selector will be in MIC position.
- The guitar will be connected to the left CH2 balanced jack
socket.
- The MP3 player will be connected to the CH3 RCA socket.
- The satellites are in stereo mode and will be plugged to
the SPEAKER OUT L and R Jack sockets.
- The amplified monitoring speaker will be connected to the
LINE OUT L output. The selector in REC out position allows
the whole signal to be sent to the monitoring speaker.
CH1 input:
Wired MIC
CH3 input:
Computer
English
Page 9