audiophony Compact7000 사용자 설명서 - 페이지 8

{카테고리_이름} audiophony Compact7000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiophony Compact7000 12 페이지. Active subwoofer and satellites

ENGLISH
4 - Wiring
4.1 - Wiring the COMPACT system:
Satellite 1
The drawing above describes an installation with a mixing desk linked to other sources (CD player,
turntable etc.).
You can also connect microphones directly to the MIC1 and MIC2 inputs, and a player to the RCA
"unbalanced inputs".
However, it is preferable to use a mixing desk to control the levels and multiply the sources.
The satelitte has an impedance of 8 Ohms and a power of 100W.
Only one 8 Ohms satellite can be connected to the active output of the subwoofer.
CAUTION
The Link output can be used to connect active speakers or an extra COMPACT system, for instance.
Page 8
COMPACT
Satellite
Frequency Range
:
80 Hz - 20 Khz
Power Handling
:
100 W RMS
Impedance
:
8 Ohms
SPL (1W/1m)
:
93 dB
IN / OUT
PIN 1+ : Full Range +
PIN 1- : Full Range -
S.N. :
Engineered and designed in France by HITMUSIC S.A.,
MADE IN CHINA for HITMUSIC S.A.
XLR inputs for a mixer
Link outputs for powered speakers
COMPACT700 - Active subwoofer and satellites
Mixer
Satellite 2
COMPACT
Satellite
Frequency Range
:
80 Hz - 20 Khz
Power Handling
:
100 W RMS
Impedance
:
8 Ohms
SPL (1W/1m)
:
93 dB
IN / OUT
PIN 1+ : Full Range +
PIN 1- : Full Range -
T
S.N. :
Engineered and designed in France by HITMUSIC S.A.,
MADE IN CHINA for HITMUSIC S.A.
Satellite outputs for
"COMPACT satellite"
speaker
8 Ohms - 100W