audiophony 9982 사용자 설명서 - 페이지 9

{카테고리_이름} audiophony 9982에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiophony 9982 12 페이지. Runner series
audiophony 9982에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)

RUNNER - 100W BATTERY-OPERATED MODULAR SOUND SYSTEM
5-7 : Description of the USB player (USB-RUN)
D7
D6
D4
D2
D5 D3
NOTE: If your USB device contains several folders, the USB-RUN does not make any difference
between the folders and will read all of them (depending on the Repeat mode chosen -D3).

6 - Power management

6 - 1 : Description of the power management system
1 - Indicators: They indicate the charge level from FULL to
LOW. PW indicates the RUNNER is active.
You must change the battery as quickly as possible when
the LOW indicator is lit.
2 - DC Input: Allows you to connect an external DC power
supply unit (24V 2.5A). Please respect the polarity (+ in the
middle).
Note about batteries:
Please use the original battery. If need to replace the battery,
use a model with the same characteristics.
Please charge the batteries before using them for the first time. The RUNNER is designed to charge two batteries
at a time.
In order to preserve the batteries, turn the device off when you are not using it.
The battery can be severely damaged it is totally emptied by an inactive system.
Moreover, the batteries must be regularly recharged to prevent it from drying.
The batteries are considered wearing parts and are not covered by the warranty.
D1 - Volume control fader: From OFF to maximum (clockwise).
D2 - Stop button: Stops the playback and goes back to the beginning
of the track.
D3 - EQ/Repeat Button:
- Allows you to choose one of the 7 preset equalization modes:
NORMAL/POP/ROCK/JAZZ/CLASSICAL/COUNTRY.
- Press and hold for 3 seconds to choose one of the 3 preset repeat
modes: OFF/SINGLE/ONE/FOLDER ALL/RANDOM.
D4 -
Button: Stops or resumes the track.
D5 -
Button: Skips to the next track.
D1
D6 -
Button: Goes back to the previous track.
D7 - USB port: Connect your USB support (key, HDD...) here.
English
1
2
Page 9