Addonics Technologies Pocket ExDrive 사용자 설명서 - 페이지 9

{카테고리_이름} Addonics Technologies Pocket ExDrive에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies Pocket ExDrive 15 페이지.

Serial ATA interface cable installation

Serial ATA Combo Hard Drive Installation

For Win98SE, Me, 2000 and XP

Note: There no drivers needed to use the Serial ATA cable as long as the

drivers are installed for the Serial ATA Controller card/chip. It is plug and play.

1. Make sure the Serial ATA cable is securely attach to the back of the drive.

(For Addonics Pocket drives such as Pocket CDROM, Exdrive etc. you

may attach the USB connector to the USB port of the computer to provide

power for the pocket drives). May vary from system's USB port power

output.

2. Make sure that power is attach to the drive and turned on.

3. Power on the system or you may hot plug while system is on.

4. On the Window Desktop, double click on the MY COMPUTER icon.

5. Plug the Serial ATA connector into your computer's Serial ATA port.

6. Wait for a few seconds, your computer may blink for a moment as well.

Double Click on the "My Computer" icon if not open yet.

You are now ready to use the Combo hard drive kit.

Note: Brand New Hard drive must be Partitioned and Formatted first.

Addonics Technologies – Pocket Exdrive Kit Users Guide v6.0