CASO DESIGN 11177 원본 운영 매뉴얼 - 페이지 6

{카테고리_이름} CASO DESIGN 11177에 대한 원본 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CASO DESIGN 11177 18 페이지. Vacuum glass canister set
CASO DESIGN 11177에 대해서도 마찬가지입니다: 원본 운영 매뉴얼 (18 페이지)

페이지 인쇄

3.1 Vacuum packing using vacuum packing devices

Our Vacuum Glass Canister Set can be vacuum packed with all commercially available

vacuum packing devices with a hose connector. To do so, please connect the vacuum hose to

the device and the adapter to the vacuum canister valve.

For an optimal vacuum, please make sure that all components are firmly attached to the

following points during the vacuuming process:

Connection of vacuum hose at the vacuum sealer (1)

•

Adapter at valve on lid of canister (2)

Please note

► When using a chamber vacuum packing device, canisters only require 5 seconds to

become sufficiently evacuated. Please abort the vacuum packing process early to ensure

your canister is not damaged. Please proceed with caution to prevent damage!

3.2 Vacuum packing using hand-operated pump

You can also vacuum the canisters with CASO hand-operated pump.

Place hand-operated pump onto the middle of lid valve and pump until

you feel resistance (approx. 15-20 times for the small canister and

approx. 30-35 times for the large canister).

Please note

► Do not apply too much pressure on the canister lid while pumping,

do not lean on canister. Extrem pressure may damage the lid.