audiophony MIC-DESK4 사용자 설명서 - 페이지 5
{카테고리_이름} audiophony MIC-DESK4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiophony MIC-DESK4 8 페이지. Microphone desk for zoneamp4120 or prezone444
페이지 인쇄MIC-DESK4 - Microphone desk for ZONEAMP4120 or PREZONE444
4 - Presentation
3
4
5
6
7
1
POWER LED
Indicates your device is activated.
2
Microphone input
Conect here the supplied microphone, you can also
connect your own microphone. The wiring of this socket
will be described in next chapter.
3
CLIP indicators
Indicate an excessive signal level on the corresponding
channel.
We strongly recommend not to exceed brief flashes of
these LEDs in order to prevent sound distortions.
4
Signal indicators
Indicate an incoming signal on the microphone input.
5
ALL button
Allows you to send the signal to all zones simultaneously.
6
1, 2, 3 and 4 buttons
These 4 buttons allow you to select one or several zones
which will receive the signal.
Selected zones lights up when activated.
7
CHIME button
Allow you to broadcast a sound signal before
announcements.
2
1
8
11
The sound signal will only be sent to selected zones.
The LOCK/UNLOCK must be on UNLOCK position to
send the signal.
8
TALK button
Press this button to broadcast an announcement.
The announcement will only be broadcast to selected
zones.
The LOCK/UNLOCK must be on UNLOCK position to
broadcast the announcement.
9
LEVEL knobs
Allows you to adjust the output sound level.
THis affects the microphone and CHIME levels.
10
RJ45 socket
Connect here an RJ45 cable from the REMOTE MIC
inputs of desyour ZONEAMP4120 or PREZONE444.
11
LOCK/UNLOCK switch
Allows you to lock the microphone desk.
On LOCK, the desk is inactive, and it is activated when
on UNLOCK.
10
9
Page 5