audiophony Recept F5 사용자 설명서 - 페이지 4

{카테고리_이름} audiophony Recept F5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiophony Recept F5 7 페이지.

English

3 - Emet-Hand F5

1 - Grille: Protects the capsule.

2 - Gain control: Allows you to configure the microphone sensitivity. The factory settings are optimal, but you can

increase/decrease the sensitivity by turning it to the left (decreases) or right (increases).

3 - Radio frequency output level selector. H for a strong signal, L for a lower signal. Allows you to increase the range

of your microphone.

4 - Battery level indicator and ON/OFF power switch.

- The indicator flashes in red when the batteries are discharged.

- The indicator flashes in red when the ASC function is activated.

5 - Batteries compartment: LR06 x 2. Please make sure you keep the same polarities if need to replace the

batteries.

6 - Synchronisation IR diode. The ASC (Auto Synchro Connection) function allows you to synchronise a chosen

channel between the transmitting microphone and the receiver via infraired transmission.

To do so, select a channel (from 1-16) on the receiver. Press the ASC button and put the IR diode of your

microphone in front of the IR diode (#9) of the receiver.

UHF

GAIN

BATT

OFF

- 500 MH