Audiophony PA AMP480 사용자 설명서 - 페이지 7
{카테고리_이름} Audiophony PA AMP480에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiophony PA AMP480 12 페이지. 1x480/4x120/4x240w pa amplifiers with 1 or 4 x 100v outputs
페이지 인쇄
AMP480/4120/4240 - 1x480/4x120/4x240W PA amplifiers with 1 or 4 x 100V outputs
4 - Using your amplifier
CAUTION: Please make sure your amplifier is not plugged in and is OFF when checking cables.
Input connectors
The line-level plug (INPUT) and LINK output are balanced.
However, they can still receive unbalanced signals.
You can also send the incoming signal from one way to another one as described below:
Output terminals
Please use high-quality cables to connect your speakers.
In order to prevent short-circuits, please tin the cables before connecting them to the output terminal.
You will find below a table of correspondence between the amplifier/speakers distance and cable sections in
order to prevent signal quality losses.
Distance
Up to 8 m
Between 8 and 12 m
Between 12 and 18 m
Between 18 and 30 m
Between 30 and 45 m
Between 45 and 60 m
Note: Never use screened cable to carry amplified signal.
Section
1,5 mm²
2 mm²
3,5 mm²
5 mm²
8,5 mm²
13 mm²
Page 7