Audiophony PA H11030 사용자 설명서 - 페이지 9
{카테고리_이름} Audiophony PA H11030에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiophony PA H11030 16 페이지.
페이지 인쇄
GO series microphones - Lavalier, headband or handheld UHF systems
3.6 - Configuring channels
Use the faders located on your transmitter and receiver to select the carrier frequency of your
UHF system.
Your transmitter and receiver must be set on the same channel.
In order to use several mic simultaneously, choose frequencies as far apart as possible.
For instance for F8 series:
For mic no. 1 on channel 1 (823.175 MHz)
For mic no. 2 on channel 6 (827.375 MHz)
For mic no. 3 on channel 13 (863.275 MHz)
For mic no. 4 on channel 16 (864.725 MHz)
This frequency range allows the use of 4 microphone simultaneously, at full volume, in the best
environment possible.
However, the signal reception depends on surrounding disturbances that might impact on the
performances.
3.7 - Available frequencies
F5 GO series
Canal 1
Canal 2
Canal 3
Canal 4
Canal 5
Canal 6
Canal 7
Canal 8
Canal 9
Canal 10
Canal 11
Canal 12
Canal 13
Canal 14
Canal 15
Canal 16
514.000 MHz
515.500 MHz
517.000 MHz
518.750 MHz
520.500 MHz
522,250 MHz
524.000 MHz
525.750 MHz
526,750 MHz
529.000 MHz
531.500 MHz
533.750 MHz
534.750 MHz
537.000 MHz
539.500 MHz
541.750 MHz
F8 GO series
Canal 1
823.175 MHz
Canal 2
823.875 MHz
Canal 3
824.825 MHz
Canal 4
825.425 MHz
Canal 5
826.225 MHz
Canal 6
827.375 MHz
Canal 7
828.225 MHz
Canal 8
828.725 MHz
Canal 9
829.500 MHz
Canal 10
830.575 MHz
Canal 11
831.375 MHz
Canal 12
831.825 MHz
Canal 13
863.275 MHz
Canal 14
863.675 MHz
Canal 15
864.325 MHz
Canal 16
864.725 MHz
English
Page 9