Addonics Technologies RAID TOWER IX RT93DAHX 사용자 설명서 - 페이지 2

{카테고리_이름} Addonics Technologies RAID TOWER IX RT93DAHX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies RAID TOWER IX RT93DAHX 8 페이지. Addonics technologies electric heater user manual

페이지 인쇄

RT93DAHX

RT93DAHXML

Screws

Removing Cover of RAID

Tower IX

Loosen the 5 screws at the back of the

tower using a Philips screwdriver by

turning counter-clockwise. Separate the

metal casing of the tower from the housing

by lifting up the casing.

eSATA Ports

Multilane Port

Installing drives into the

RAID Tower V

Step 1

Use a Philips screwdriver to secure the

3.5" SATA hard drive to the drive tray

Step 2

Slide the tray into the Disk Array drive bay.

Note: It is recommended to fill up the RAID

Tower IX with SATA drives from top to

bottom. This is to help in identifying which

drives connects to which ports for easier

troubleshooting.

Note: The 5 port HPMXA system version

PCB board is mounted inside the RAID

tower and is connected to the multilane

bridge that is mounted at the back of the

RAID tower.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/