Consonics CyberTek Qualifier 사용자 설명서 - 페이지 9

{카테고리_이름} Consonics CyberTek Qualifier에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Consonics CyberTek Qualifier 19 페이지.

Hardware Installation

Install Transmitter

Mount Transmitter

Vehicular Device

Consists of:

Vehicular Mounted Receiver/Transmitter

Mount in an environmentally protected area of the vehicle

Mount with visibility to LED indicators

Receiver/Transmitter Powers from Vehicle

Transmitter produces output signal with unique signature

Transmitter can be factory set to one of three FCC approved frequencies

Transmitter switches between three fixed output power settings as controlled by the

receiver section and commanded by the handheld device

Receiver section receives commands from handheld device

Turn transmitter on / off

Select transmitter output power

Power Transmitter

Wiring Harness for Receiver/Transmitter

Connect harness to battery of vehicle

Harness contains protection fuse

Maintain proper fuse rating

Protect harness from nicks, pinches, chaffing, damage.

Install Antenna

Mount Antenna

Route Antenna Cable

Vehicular Magnetic Mount Dual Band Antenna

50 ohm cable permanently connected to antenna

BNC connector to receiver/transmitter

Protect antenna cable from nicks, pinches, chaffing, damage

Place antenna in center of vehicle roof, clear of metallic objects

Metallic objects on vehicle roof may cause improper operation of the system

Qualifier Supplement