Aeware in.k400 매뉴얼 - 페이지 12

{카테고리_이름} Aeware in.k400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeware in.k400 14 페이지. Compact keypad for in.xe spa systems
Aeware in.k400에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

페이지 인쇄
Aeware in.k400 매뉴얼
in.k400

Setting temperature unit

Water temperature can be
displayed in either Fahrenheit
(˚F) or Celsius (˚C).
.
Press Prog. key a sixth time
The display will show either
˚F or ˚C.
Use Up or Down key to change
setting.
Water temperature
regulation
In a regulation cycle, the system
fi rst generates water fl ow
through the heater housing
and the plumbing, in order
to ensure accurate water
temperature readings as well as
avoiding heater activation in dry
conditions.
After verifying pump activation
and taking a water temperature
reading if required, the system
automatically turns the heater
on to reach and maintain water
temperature at Set Point.
Cooldown
After heating the spa water to
the desired Set Point, the heater
is turned off, but its associated
pump (Pump 1 Low-speed or
CP) remains on for a
predetermined period of time
to ensure adequate cooling
of the heating element, this
prolongs its useful life. The
heater icon fl ashes during this
time.
functions
Smart Winter Mode
Our Smart Winter Mode
protects your system from
the cold by turning pumps on
several times a day to prevent
water from freezing in pipes.
11