Consort CSL2SC 설치 및 제어 매뉴얼 - 페이지 3
{카테고리_이름} Consort CSL2SC에 대한 설치 및 제어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Consort CSL2SC 4 페이지. 2kw convector heaters using sl wireless controllers
Consort CSL2SC에 대해서도 마찬가지입니다: 설치 및 제어 매뉴얼 (4 페이지)
페이지 인쇄
Operation
This heater can only be used when connected to a SL
Wireless Controller. Each SL controller can control any
number of heaters providing they are in the RF range.
The heater has an indicator light positioned on the
fascia panel. The light may be:
Green
-
when no heat is needed
Red
-
when the heater is on full power
SLPB
SLVT
Please refer to the SL user and operating instructions for
full operational details.
CSL2SC
SLTI
SL wireless controllers
Wall Mounting
The heater must not be located immediately below a
fixed socket outlet.
The Wall Mounting brackets are packed separately in
the carton. Fit the top mounting brackets to the wall
at the height and centres shown in the diagram.
Withdraw the two feet-securing screws from the base
of the heater and use these screws to secure the
right-angled brackets to the base of the rear panel of
the heater in the correct holes. These are the holes in
the two protruding lugs.
Mount your appliance onto the top brackets via the
two slots in the rear panel. Secure the bottom
brackets to the wall as shown.
WARNING: THIS APPLIANCE MUST BE EARTHED
IMPORTANT: ALWAYS RETAIN YOUR USER INSTRUCTIONS
FOR FUTURE REFERENCE
CSL2SR
3
62001222 Iss 01