Dante BLUESTREAM DA44AU 사용자 설명서 - 페이지 4
{카테고리_이름} Dante BLUESTREAM DA44AU에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dante BLUESTREAM DA44AU 12 페이지.
페이지 인쇄Front Panel
1
2
3
4
5
6
Power Indicator LED - Illuminates when the unit is powered on
1
Input Indicator LED - Illuminates when an analogue audio signal is detected on the associated input into the unit
2
NET Indicator LED - Illuminates when the unit is receiving a Dante® network audio signal and audio is output
3
Link Indicator LED - Illuminates when the unit is connected to PC configuration software
4
48V Phantom Power Indicator LED - Illuminates when 48V phantom power is enabled on the associated input
5
Output Indiciator LED - Illuminates when a Dante® audio signal is being received and output via the assosiated output
6
LCD Display - Shows the status of network connection and menu selection
7
ESC Button - Escapes out of selected menu option
8
Rotary Dial / Enter Button - Rotate dial to scroll through selected menu item, press to select current menu item
9
Power button - Press to turn the unit on or off
q
Rear Panel
1
Power Port – Use included 12V/1A DC adaptor to power the device
1
Dante® Network Ports - 2 x RJ45 sockets to connect to Dante® network, note the DA44AU will only allow 1 network connection at
2
a time, the device does not have two independent network interfaces. The 2nd RJ45 is for redundancy but can also be cascaded
to additional DA44AU units (up to 7 x devices)
RS-232 Port – 3-pin Phoenix connector to for control of the device from a computer or 3rd party control processor
3
4ch Audio Outputs - 12-pin Phoenix connector to connect to audio amplifier or mixing device, supports both balanced and
4
unbalanced audio output from devices connected to the Dante® network (Note: will not output audio connected to the input of
the same DA44AU device due to limitations of the Dante® Ultimo chipset)
4ch Audio Inputs - 12-pin Phoenix connector to connect to microphone or source audio device to convert the input signal to
5
Dante® audio, supports both balanced and unbalanced signals including 48V phantom power
04
7
2
3
8
4
www.blustream.com.au
DA44AU
USER MANUAL
9
10
5
|
www.blustream.co.uk