Audioplex OPT-4 제품 정보 - 페이지 2
{카테고리_이름} Audioplex OPT-4에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Audioplex OPT-4 2 페이지. Opt series speaker selectors
페이지 인쇄
exactly the same amount of power to each
speaker pair regardless of how many
speakers are playing, so there are never
any variations of volume when rooms are
turned on and off.
Wiring an OPT-2/4/6 System with
one source amplifier
Two connections need to be made:
1) Connect speaker wire from the main speaker
output of the amplifier/receiver to the
amplifier A inputs of the OPT selector.
2) Optional but recommended: connect a speaker wire
jumper from the amplifier A inputs to the amplifier
B inputs when not using two amps/receivers.
RECEIVER A
AUDIOPLEX OPT-4
Power Handling:
Speaker/Amplifier Connectors:
Dimensions:
CUSTOM
ELECTRONIC
DESIGN &
INSTALLATION
ASSOCIATION
404 GWH PO BOX 440
A
PPLICATION
OPTIONAL JUMPER CONNECTION
S
PECIFICATIONS
Suitable for use with amplifiers of up to 200 watts per channel.
Screw-type connectors capable of connecting 14 gauge wire.
OPT-2 11.5"W x 2"H x 6"D / OPT-4/6 17"W x 1.75"H x 6.25"D.
TECHNOLOGY
MELVIN VILLAGE, N.H. 03850
www.audioplex.com
Lifetime Warranty
Audioplex provides a lifetime warranty,
guaranteeing the performance and
function of our switchers for the life
of the original end user.
N
OTES
Wiring an OPT-2/4/6 System with
two source amplifiers
Three connections need to be made:
1) Connect speaker wire from the main speaker
output of amplifier/receiver A to the
amplifier A inputs of the OPT selector.
2) Connect speaker wire from the main speaker
output of amplifier/receiver B to the
amplifier B inputs of the OPT selector.
3) Connect speaker wire from each of the
room outputs to each of the pairs of speakers.
RECEIVER A
800-257-2077
RECEIVER B (OPTIONAL)
AUDIOPLEX OPT-4
MADE IN
U.S.A
FAX: 603-544-8901